Jump to content


Photo

Data coming out as "0000000000"


Best Answer pqueller , 05 May 2015 - 02:30 PM

I did eventually solve the problem. The string of 0s came after I tested the readers on my university campus. When tested in the field there was no problem. After speaking with an electronics technician on campus, we thought that the university's large radio antennae may have been interfering with readers. Go to the full post


  • Please log in to reply
4 replies to this topic

#1 pqueller

pqueller
  • General Members
  • 7 posts
  • Trinity University, San Antonio, TX,
  • United States

Posted 18 June 2013 - 11:45 AM

Some of my RFID readers are storing hundreds of visits as "0000000000". Has anyone had any experience with this? I thought it might be a low battery issue because it usually happens at the end of the list of data for that specific download, shortly before the battery dies. But a few times it will be the first data entry on a fresh battery. I have the threshold set as 80% and I'm using Gen 1 readers. Any ideas? Thanks!



#2 danifreund

danifreund
  • General Members
  • 3 posts
  • Trinity University TX,
  • United States

Posted 30 April 2015 - 08:50 AM

Im trying to run Termite 3.1 on a Windows VirtualBoxVM on a mac, but the program fails to initialize the port, and doesn't verify the COM port settings. I have all the settings the same as I do on a windows computer, where termite runs fine, including the port set to COM 3. I was wondering if anyone has tried using termite on virtual windows and had the same problem?

~Dani Freund



#3 Chris Merkord

Chris Merkord

    Administrator

  • Administrators
  • 1,682 posts
  • Vermillion, South Dakota,
  • United States

Posted 04 May 2015 - 08:58 AM

Dani, I suggest starting a new topic in this forum.  That will get the attention of the forum moderator, Eli Bridge, and any other folks who follow the forum.  Replying to this old thread won't necessarily attract a reply.

 

Philip, did yo solve your original problem?  If so, please do post to let us know the solution.



#4 pqueller

pqueller
  • General Members
  • 7 posts
  • Trinity University, San Antonio, TX,
  • United States

Posted 05 May 2015 - 02:28 PM

Some of my RFID readers are storing hundreds of visits as "0000000000". Has anyone had any experience with this? I thought it might be a low battery issue because it usually happens at the end of the list of data for that specific download, shortly before the battery dies. But a few times it will be the first data entry on a fresh battery. I have the threshold set as 80% and I'm using Gen 1 readers. Any ideas? Thanks!



#5 pqueller

pqueller
  • General Members
  • 7 posts
  • Trinity University, San Antonio, TX,
  • United States

Posted 05 May 2015 - 02:30 PM   Best Answer

I did eventually solve the problem. The string of 0s came after I tested the readers on my university campus. When tested in the field there was no problem. After speaking with an electronics technician on campus, we thought that the university's large radio antennae may have been interfering with readers.
  • Chris Merkord likes this




0 user(s) are reading this topic

0 members(s), 0 guests(s) and 0 anonymous member(s)